LiteOn EVO 6800 Series, Manual

Page: 127 / 261

127
6.6 Group E, Multi-Function Terminals
E1 Multi-Function Digital Inputs

E1- 00 to E1- 07 Terminal S1 to S7 Function Selection
Assigns functions to multi-function terminals S1 to S7. Set this parameter according to Table
6.18.
No. Name Setting Range Default
E1-00 Terminal S1 Function
Selection
0～74 / 100~174 0 : 2-Wire Sequence Control (Forward/Stop)
E1-01 Terminal S2 Function
Selection
0～74 / 100~174 1: 2-Wire Sequence Control (Forward/Stop)
E1-02 Terminal S3 Function
Selection
0～74 / 100~174 23 : External Fault
E1-03 Terminal S4 Function
Selection
0～74 / 100~174 39: Fault Reset
E1-04 Terminal S5 Function
Selection
0～74 / 100~174 5: Multi-Step Speed Command 1
E1-05 Terminal S6 Function
Selection
0～74 / 100~174 6: Multi-Step Speed Command 2
E1-06 Terminal S7 Function
Selection
0～74 / 100~174 9: Jog Frequency
Note1. Digital input terminals if necessary reverse input function, parameter settings can be selected for
its hundreds digit 1 can be realized
EX: Forward / stop selection for the N
、
C mode, the parameter can be set to 100.
Note2. Parameters option contains 2
、
23 to 38,select N
、
C modes
Table 6.18
Setting Functions Setting Functions
0 2-Wire Sequence Control
(Forward/Stop)
41 Multi-Function Analog Input Selection
(Terminal A1 and A2)
1 2-Wire Sequence Control
(Reverse/Stop)
42 Retain
2 3-Wire Sequence 43 Retain
3 Local/Remote Selection 44 Retain
4 Command Source 1/2 Selection 45 Communication Mode
5 Multi-Step Speed Command 1 46 PID Disable
6 Multi-Step Speed Command 2 47 PID Integral Reset