185
Note:
1. A 10% of the drive rated current and motor rated torque are used for the torque detection function.
2. Overtorque/ undertorque detection is set as a percentage of the drive rated output current in Open-Loop V/F
Control, Closed-Loop V/F Control, and PM Open-Loop Vector Control control methods. Overtorque/ undertorque
detection is set as a percentage of the motor rated torque in Open-Loop Vector Control, Closed-Loop Vector
Control, and PM Closed-Loop Vector Control control methods.
P6-00
Overtorque/ Undertorque Detection Selection 1
Sets the operation when the motor current or torque exceeds the P6-01 level for longer than
the time set to P6-02.
No.
Name
Setting Range
Default
P6-00
Overtorque/ Undertorque Detection Selection 1
0 to 8
0
0 : Disabled
1 : Overtorque Alarm at Speed Agree
Overtorque detection is active only when the output frequency is the same as the frequency
command. No detection during acceleration or deceleration. The drive continues to run after
an ot1 (Overtorque Detection 1) alarm is triggered.
2 : Overtorque Alarm at Run
Overtorque detection is active when the Run command is active. The drive continues to run
after an ot1 (Overtorque Detection 1) alarm is triggered.
3 : Overtorque Fault at Speed Agree
Overtorque detection is active only when the output frequency is the same as the frequency
command. No detection during acceleration or deceleration. The drive stops operation after
an ot1 (Overtorque Detection 1) fault is triggered.
4 : Overtorque Fault at Run
Overtorque detection is active when the Run command is active. The drive stops operation
after an ot1 (Overtorque Detection 1) fault is triggered.
5 : Undertorque Alarm at Speed Agree
Undertorque detection is active only when the output frequency is the same as the frequency
command. No detection during acceleration or deceleration. The drive continues to run after
an Ut1 (Undertorque Detection 1) alarm is triggered.
6 : Undertorque Alarm at Run
Summary of Contents for EVO 6800 Series
Page 1: ...MANUAL Compact Vector Drive EVO 6800 Series...
Page 33: ...33 34 2 36 0 2 8 93 0...
Page 35: ...35 4 2 Main Circuit...
Page 41: ...41 4 3 Control Circuit...
