manualshive.com logo in svg

Kyocera TASKalfa 420i, Operation Manual, Page: 313 / 428

Share
Download
Kyocera TASKalfa 420i Operation Manual Download Page 313

Maintenance 

OPERATION GUIDE

9-3

9

Slit Glass/Dual scanning area

If black streaks or dirt appears in copies when using the 
optional document processor, clean the slit glass with 
the supplied cleaning cloth. The message 

Clean the slit 

glass.

 may be displayed if the slit glass requires 

cleaning.

When using the document processor to allow dual 
scanning, clean the dual scanning unit also.

IMPORTANT: 

Wipe the slit glasses with the dry 

accessory cloth. Do not use water, soap or solvents for 
cleaning.

1

Remove the cloth from the cleaning cloth 
compartment.

2

Open the document processor and wipe the slit 
glass (a).

3

Wipe the white guide (b) on the document 
processor.

4

When using the document processor to allow dual 
scanning, open the top cover of the document 
processor.

Hold

1.Open the document processor.
2.Clean the surface of the slit glass located
  on the left side with the supplied dry cloth.
3.Close the document processor and press [End].
Note that dirty glass and sheet may cause
black streaks to appear in the output.

Clean the slit glass.

02/03

End

Status

08/08/2009    10:10

a

b

Summary of Contents for TASKalfa 420i













































































































































































































































































































































































































































Reviews:

No comments