Kyocera TASKalfa 420i, Operation Manual

Page: 136 / 428

Copying Functions
4-14 OPERATION GUIDE
Types of Page Boundary Lines
The following types of the boundary lines are available.
The procedure for using Combine mode copying is explained below.
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Layout/Edit] and then [Combine].
4
Press [2 in 1] or [4 in 1], and choose the page layout
of Layout.
5
Press [Border Line] to choose the type of the lines
to indicate page boundaries. Press [OK].
6
Press [Original Orientation] to choose orientation of
the originals, either [Top Edge Top] or [Top Edge
Left]. Then press [OK].
7
Press [OK].
8
Press the Start key. Copying begins.
If the original is placed on the platen, replace the
original and press the
Start key.
After scanning all originals, press [Finish Scan] to
start copying.
None Dotted Solid Borders
(Cropmark)
Status
08/08/2009 10:10
Ready to copy. Copies
Cancel OK
Combine
Add Shortcut
Layout
4 in 1
2 in 1
Left then
Down
Original
Orientation
Off
Border Line
Down then
Right Down then
Left
Right then
Down
Original :
:
:
Zoom
Paper
Preview
---
---
100%
Place original.
Top Edge Top
None