Kyocera TASKalfa 420i, Operation Manual

Page: 298 / 428

Default Setting (System Menu)
8-66 OPERATION GUIDE
4
Press [Change] of DHCP .
5
Press [On] or [Off] of DHCP . When selecting [On], IP Address (Stateful) appears.
6
Press [OK].
7
After changing the setting, restart the system or turn the machine OFF and then ON again.
For detailed information on restarting the system, refer to Restarting the System on page 8-63 .
Protocol Detail
The table below lists the
network related
function settings. The network related functions are available when
TCP/IP is On.
Item Description
Default
Setting Restarting the
System*
NetBEUI Selects whether or not to receive
documents using NetBEUI. On Y
LPD Select whether or not to receive
documents using LPD as the network
protocol. On Y
SMTP
(E-mail TX) Select whether or not to send e-mail
using SMTP.
Off N
POP3
(E-mail RX) Select whether or not to receive e-mail
using POP3.
Off N
FTP Client
(Transmission) Select whether or not to send
documents using FTP. When selecting
[On], set the FTP Port Number. Use
the FTP default port 21. On
Port:21
Y
FTP Server
(Reception) Select whether or not to receive
documents using FTP. On Y
SMB Client
(Transmission) Select whether or not to send
documents using SMB. When
selecting [On], set the SMB default
Port Number. Use the SMB default port
139. For Windows Vista, use 445. On
Port:139
N
i-FAX Select whether or not to use i-FAX. On N
LDAP Select whether or not to use LDAP. Off N
SNMP Select whether or not to communicate
using SNMP. On Y
SNMPv3 Select whether or not to communicate
using SNMPv3. Off Y
HTTP Select whether or not to communicate
using HTTP. On Y