Kyocera TASKalfa 420i, Operation Manual

Page: 145 / 428

Copying Functions
OPERATION GUIDE 4-23
4
Page Numbering
Number multiple pages of originals in sequential order. The formats for numbering are [-1-], [P.1] or [1/n]. The
format [1/n] prints the total number of pages in the place of
n .
Select Top Left , Top Middle , Top Right , Bottom Left , Bottom Middle or Bottom Right as the page numbering
position.
Use the procedure below to insert page numbers on your copies.
1
Press the Copy key.
2
Place the originals in the document processor or on
the platen.
3
Press [Layout/Edit] and then [Page #].
4
Select the numbering format from [-1-], [P.1] or
[1/n].
5
Select the page numbering position.
6
To start page numbering from a page other than the
first page, press [+] or [–] of 1st Page and select the
starting page. You can also enter the number with
the numeric keys after pressing [# Keys].
7
To start the numbering with a number other than 1,
press [+] or [–] of Start Number and enter the
starting number. You can also enter the number
with the numeric keys after pressing [# Keys].
8
If you do not want page numbering through to the
last page, press [Last Page]. Select
Manual and
use [+] or [-] to enter the final page to be numbered
(a negative number of pages counting backwards
from the last page). Then press [OK]. You can set a
value up to -10. You can also enter the number with
the numeric keys after pressing [# Keys].
Original [ – 1 –] [P.1] [1/n]
Ready to copy.
Copies
Cancel OK
Page #
1st Page
Off
1/n
(1 - 10) Start # (1 - 999)
# Keys # Keys
Top Edge Top
Original
Orientation
P.1
Auto
Denominator
#
-1-
Auto
Last Page
1
1
Status 08/08/2009 10:10
Position
Top
Middle Top
Left Top
Right
Bottom
Left Bottom
Middle Bottom
Right