Kyocera TASKalfa 420i Operation Manual Download Page 203

Page: 203 / 428

Document Box

OPERATION GUIDE

6-11

Deleting Documents

The procedure for deleting documents in a custom box is explained below.

Press the

Document Box

key.

Press [Custom Box], select the box containing the
document you want to delete and press [Open].

NOTE:

If a custom box is protected by a password,

enter the correct password.

Select the document you wish to delete by
checking the checkbox.

The document is marked with a checkmark.

NOTE:

[Delete] is disabled until a document is

selected.
To deselect, press the checkbox again and remove the
checkmark.

Press [Delete]. The delete confirmation screen
appears.

Press [Yes]. The document is deleted.

1/1

0001

0404200710574501

10/10/2008 09:40

Box:

File Name

Date and Time

Size

Status

08/08/2009 10:10

0404200710574511

0404200710574521

10/10/2008 09:50

10/10/2008 10:00

Send

Join

Move/Copy

Delete

Store File

Detail

Preview

0002

0003

Search(Name)

Summary of Contents for TASKalfa 420i













































































































































































































































































































































































































































Search results

Summary of Contents for TASKalfa 420i

Reviews:

Kyocera TASKalfa 420i, Operation Manual, Page: 203 / 428

Search results

Summary of Contents for TASKalfa 420i

Reviews: