Kyocera TASKalfa 420i Operation Manual Download Page 294

Page: 294 / 428

Default Setting (System Menu)

8-62

OPERATION GUIDE

Deleting Applications

Use the procedure below to delete an installed application.

IMPORTANT:

Always exit the application to be deleted before deleting the application. (Refer to

Activating/

Deactivating Application on page 8-60

Press the

System Menu

key.

Press [ ] and then [Application].

NOTE:

If login administration is disabled, the user authentication screen appears. Enter your login user name

and password and then press [Login]. For this, you need to login with administrator privileges. Refer to

Adding

a User on page 11-5

for the default login user name and password.

Select the application to be deleted and press [Delete].

You can view detailed information on the selected application by pressing [Detail].

When the deletion confirmation screen appears, press [Yes]. The application is deleted.

Summary of Contents for TASKalfa 420i













































































































































































































































































































































































































































Search results

Summary of Contents for TASKalfa 420i

Reviews:

Kyocera TASKalfa 420i, Operation Manual, Page: 294 / 428

Search results

Summary of Contents for TASKalfa 420i

Reviews: