Kyocera TASKalfa 420i, Operation Manual

Page: 142 / 428

Copying Functions
4-20 OPERATION GUIDE
The procedure for using Booklet copying is explained below.
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Layout/Edit] and then [Booklet].
4
Press [1-sided>>Booklet] to produce a booklet
from single-sided originals.
Press [2-sided>>Booklet] to produce a booklet
from two-sided originals.
Press [Book>>Booklet] to produce a booklet from
an open book original.
5
If you selected [2-sided>>Booklet] or
[Book>>Booklet], choose the binding orientation in
Finishing.
If you selected [1-sided>>Booklet], choose the
binding orientation in Finishing.
6
If you choose [1-sided>>Booklet],
[2-sided>>Booklet], or [Book>>Booklet] you can
add the cover. Press [Cover], select [Cover] and
press [OK].
7
Press [Original Orientation] to choose orientation of
the originals, either [Top Edge Top] or [Top Edge
Left]. Then press [OK].
8
If the optional 3,000 sheet document finisher and
folding unit are installed, the [Saddle Stitch] option
is displayed.
To use saddle stitching, press [Saddle Stitch] and
then press [Bind and Fold]. You can saddle stitch
up to 16 sheets (64 pages).
9
Press [OK].
10
Platen and press the Start key. Copying begins.
NOTE:
When using the platen, be sure to place the
originals in page order.
If the originals are placed on the platen,
consecutively replace each original after pressing
the
Start key.
After scanning all originals, press [Finish Scan] to
start copying.
Status 08/08/2009 10:10
Ready to copy.
Copies
Cancel
OK
Booklet
Add Shortcut
Original
2-sided
>>Booklet
1-sided
>>Booklet
Binding
Top
Saddle
Stitch
Original
Orientation
Off
Binding
Left/Right
Book
>>Booklet
Finishing
Cover
Binding
Right
Binding
Left
Binding
Top
Original
Zoom
Paper :
:
: ---
---
100%
Preview
Place original.
Top Edge Top
Off
Off