Kyocera TASKalfa 420i, Operation Manual

Page: 159 / 428

Copying Functions
OPERATION GUIDE 4-37
4
Outputting Repeat Copy Jobs
The Repeat Copy jobs are stored in the Document Box. Refer to Job Box on page 3-33 to print out the Repeat
Copy jobs.
Maximum Number of Repeat Copy Jobs Retained
You can use the procedure below to change the maximum number of copy jobs that can be retained in the
document box.
Use the procedure below to change the maximum number of copy jobs retained.
1
Press the System Menu key.
2
Press [Document Box/Removable Memory] and
then [Next] of
Job Box .
3
Press [Change] of Repeat Copy Job Retention .
4
Use the [+] or [-] key to enter the maximum
retention number.
You can also enter the number from the numeric
keys.
A number between 0 and 50 can be entered as the
number of retained jobs.
NOTE:
If you enter a value of 0 (zero), you cannot use
the Repeat Copy function.
5
Press [OK].
Document Box/Removable Memory - Repeat Copy Job Retention
Set the maximum number of repeat copy jobs to retain.
Use [-]/[+] or the numeric keys to enter a number.
*Set this number to 0 to not retain any jobs.
(0 - 50)
32
Cancel OK
Status
08/08/2009 10:10
job(s)