Kyocera TASKalfa 420i Operation Manual Download Page 348

Page: 348 / 428

Troubleshooting

10-24

OPERATION GUIDE

Pull out paper feed unit (A2).

Open paper feed unit cover (A3) and remove any
paper.

If the paper tears, remove every loose scrap from
inside the machine.

If the paper is torn, pull paper feed unit (A2) all the
way out and lift it slightly to remove any paper.

Remove the paper.

If you cannot remove the paper, proceed with the
next step.

Push paper feed unit (A2) back in place, and close
the front cover.

Summary of Contents for TASKalfa 420i













































































































































































































































































































































































































































Search results

Summary of Contents for TASKalfa 420i

Reviews:

Related manuals for TASKalfa 420i

Brands by name

Popular brands

Kyocera TASKalfa 420i, Operation Manual

Search results

Summary of Contents for TASKalfa 420i

Reviews:

Related manuals for TASKalfa 420i

Brands by name

Popular brands