Kyocera TASKalfa 420i Operation Manual Download

Page: 280 / 428

Default Setting (System Menu)

8-48

OPERATION GUIDE

Time Zone

Set the time difference in the location you are from GMT.

Use the procedure below to set the time difference.

Press the

System Menu

key.

Press [

], [Date/Timer] and then [Change] of

Time Zone

Select the location.

NOTE:

Press [

] or [

] to select the location.

Press [Off] or [On] of

Summer Time

and press [OK].

NOTE:

If you select a region that does not utilize summer time, the summer time setting screen will not appear.

Auto Panel Reset

If no jobs are run for a certain period of time, automatically reset settings and return to the default setting.

NOTE:

Refer to

page 8-15

for the default settings.

Auto Panel Reset ON/OFF

Select to use Auto Panel Reset or not.

Use the procedure below to specify the auto panel reset setting.

Press the

System Menu

key.

Press [

], [Date/Timer] and then [Change] of

Auto Panel Reset

Press [Off] or [On].

Press [OK].

Panel Reset Timer

If you select [On] for

Auto Panel Reset

, set the amount of time to wait before

Auto Panel Reset

. Options are

between 5 and 495 seconds (every five seconds).

NOTE:

If you select [Off] for

Auto Panel Reset

, the time display does not appear.

Use the procedure below to set the reset time.

Press the

System Menu

key.

Press [

], [Date/Timer] and then [Change] of

Panel Reset Timer

Summary of Contents for TASKalfa 420i













































































































































































































































































































































































































































Search results

Summary of Contents for TASKalfa 420i

Reviews:

Related manuals for TASKalfa 420i

Brands by name

Popular brands

Kyocera TASKalfa 420i, Operation Manual

Search results

Summary of Contents for TASKalfa 420i

Reviews:

Related manuals for TASKalfa 420i

Brands by name

Popular brands