3-4
User Interface Basics
Program and Category Buttons
Program and Category Buttons
Use the
Program
and
Category
buttons, in conjunction with the Bank buttons, to directly select
PC3 programs. Each of the 16 categories contains 8 programs.
Picking favorites
When you select a program within a category, your selection will be remembered. For example,
choose program 3 in the Organ category (press
Category: Organ
, then
Program: 3
). Now move
to the strings by pressing the
Category: Strings
button. If you press the
Category: Organ
button
again, you will be returned to program 3 in the Organ category. In this way, each category can
have a “favorite” program.
You can make program selections within each category ahead of time. This way, you’ll be able to
access the program you want in any category simply by pressing appropriate category button.
Important things to remember about your “favorites”:
•
You must save your PC3’s Master Table to remember your selections across power cycles.
See Chapter 11 for information about the Master Table.
•
Your selections are bank-dependent. In other words, you can save eight in the Base 1 bank,
eight in the Exp 1 bank, etc.
Summary of Contents for PC3
