Kurzweil PC3, Musician'S Manual

Page: 124 / 308

7-4
Setup Mode
The Setup Editor
Table 7-2 gives you a quick visual reminder of how zones behave depending on their status.
Remember that any changes you make to zone status in Setup mode are temporary; as soon as
you select another setup, that setup’s programmed zone status takes over. To change a setup’s
zone status permanently, use the Setup Editor (see
Status on page 7-7).
Soloing a Zone
To solo a zone, set the Status parameter on the Setup Editor CH/PROG page (see The Setup
Editor and The Channel/Program (CH/PROG) Page on the following pages) to Solo (or
Solo+Muted ). The Chan/Layer buttons—in addition to scrolling through the zones of the
current setup—now select the soloed layer. If you scroll through the zones, you will see the red
solo LED moving across the mute buttons. After one zone is soloed, you can choose a different
zone to be soloed by pressing on its zone-status button; this action unsolos the previously soloed
zone.
Additionally, you can configure a setup such that you can solo zones in real time by assigning
any of the controller destinations to
SoloZn . See Controllers on page 7-19 for more information
on controller destination assignments in Setup mode.
The Setup Editor
From Setup mode, press the Edit button to enter the Setup Editor, where you can make changes
to the currently selected setup. Use the soft buttons to select the various Setup Editor pages. The
upper line of each page displays the usual mode reminder, as well as the current Setup Editor
page, and the current zone. Use the
Chan/Layer buttons to select one of up to eight different
zones, each having its own set of Setup Editor pages.
The parameters on the Setup Editor pages define what each of a setup’s zones sends—both to
internal programs and to the MIDI Out port. They also determine how the PC3 responds to
MIDI signals received from a MIDI controller connected to the PC3’s MIDI In port (when the
Local Keyboard Channel matches the transmit channel of your MIDI controller).
The display diagrams you see in this chapter show the default values for setup 126 Internal
Voices .
LED Color
Zone
Status
Data Generated by Zone
Notes Controllers
Program
Number
Entry and
Exit Values
Red
Solo,
Solo+Muted
✔ ✔ ✔ ✔
Green (no others are red) Active
✔ ✔ ✔ ✔
Green (another is red) Backgrounded
✔ ✔
Orange Muted
✔ ✔
(Off) Empty
Table 7-2 Zone Status in Setup Mode