Kurzweil PC3, Musician'S Manual

Page: 137 / 308

Setup Mode
The Pan/Volume (PAN/VOL) Page
7-17
The Pan/Volume (PAN/VOL) Page
By changing the parameters on this page, you can define how each zone sends MIDI volume
and pan messages.
Entry Volume, Exit Volume
Entry Volume enables you to control the initial MIDI volume setting for each zone of the current
setup. When you select a setup in Setup mode, the PC3 sends MIDI volume control (MIDI
Controller 07) messages on each of the setup’s MIDI channels, according to the value of the
Entry Volume parameter. This sets the starting volume level for each zone, for any value other
than
None . Subsequent MIDI volume control signals sent to the setup’s MIDI channels affect the
volume normally.
When you exit the current setup, Exit Volume sends another MIDI Controller 07 message.
The setting of the Volume Lock parameter on the MIDI mode CHANNELS page (see
Chapter 10) determines whether this parameter has any effect.
Entry Pan, Exit Pan
You can set entry and exit values for Pan as well. When you select a setup, the PC3 sends a MIDI
pan control (MIDI Controller 10) message on each MIDI Channel in each zone; another MIDI
pan control message is sent when you exit the setup. The Entry and Exit values for Pan are the
same as those for Volume. There is also a Pan Lock parameter on the MIDI-mode CHANNELS
page, which overrides the Setup Editor’s Pan settings.
If you are trying to set the Pan and the program doesn’t seem to be responding, you should
check the Mode parameter on the OUTPUT page in the Program Editor. If it is set to
Fixed , then
the PC3 is ignoring the MIDI Pan message; setting Mode to +MIDI allows you to control the
program’s panning from the Setup Editor.
Parameter Range of Values Default
Entry Volume None, 0-127 None
Exit Volume None, 0-127 None
Entry Pan None, 0-127 None
Exit Pan None, 0-127 None