Kurzweil PC3, Musician'S Manual

Page: 203 / 308

Effects
FXMod Diagnostic
9-25
FXMod Diagnostic
This algorithm allows you to view the current levels of any data sliders, MIDI controls, switches,
or internally generated VAST LFOs, ASRs, FUNs, etc. which are available as modulation
sources. It has no effect on any signal being routed through it.
Up to eight modulation sources may be monitored simultaneously. Meters #1 through #4 can
monitor bipolar sources, meaning sources that can have both positive and negative values. The
range of the bipolar meters is -1 to +1. Four monopolar meters #5 through #8 provide better
resolution, but the range is limited to 0 1. Use the monopolar meters for sources which
you do not expect to go negative.
Eight parameters are provided to connect modulation sources to the meters. The parameter
values are fixed at “NoDpth” and have no function except to connect sources to meters.
To use the algorithm, save a stereo preset containing the algorithm, then a chain containing that
preset. Go to one of the Chain MOD pages, and choose one of the meter parameters (Bipole N or
Monopole N). You will not be able to modify the Adjust or Depth fields, but you can select any
source you want. You can view the meters on PARAM page 2.
Bipole1 through Bipole4 attach bipolar modulation sources (those that can go positive or
negative) to the bipolar meters. The parameters are not adjustable.
Monopole5 through Monopole8 attach monopolar modulation sources (can go positive only) to
the monopolar meters. The parameters are not adjustable.
Mono Algorithms
Many stereo algorithms are also available in a mono configuration. Refer to the KSP8 Algorithm
Reference Guide for complete information on Mono algorithm parameters . You can download a
copy of this manual at the Kurzweil Music Systems web site: www.kurzweilmusicsystems.com.