manualshive.com logo in svg

Kubota M7-132, Operator'S Manual

The Kubota M7-132 Operator's Manual is available for download free of charge on manualshive.com. This comprehensive manual provides detailed instructions and information on operating and maintaining the Kubota M7-132 tractor. Download it today for a thorough understanding of this powerful machinery.

Share
Download
background image

remote hydraulic control (Premium, Premium KVT

models)
testing..................................................................263

remote hydraulic control system............................... 221
remote valves

controls.........................................................221,223

replacing secondary element

replacing..............................................................267

responsibilities of the owner........................................19
rev-limiter control setting........................................... 138
ride control (3-point hitch)......................................... 220
road mode travelling speed gear (Standard model)

setting..................................................................164

road mode travelling speed range (Premium model)

setting..................................................................166

RPM dual memory

setting..................................................................139

S

safety

CAB and ROPS.....................................................13
driving tractor on the road..................................... 15
general information............................................... 13
operating PTO.......................................................17
operating tractor.................................................... 14
operating tractor on slopes....................................15
parking tractor....................................................... 16
passenger seat (if equipped).................................15
servicing tractor.....................................................17
starting to operate tractor...................................... 14
transporting tractor.............................................. 192
using 3-point hitch................................................. 17
working tractor.......................................................14

safety for children........................................................15
safety labels................................................................ 21

caring.................................................................... 28

safety regulations........................................................ 20
SCR

outline..................................................................129

SCR muffler...............................................................129
SCR system

troubleshooting....................................................131

SCR system icon.......................................................130
SCR system inducement display.............................. 130
screen brightness setting (K-monitor Pro)...................82
screen settings (K-monitor Pro)

changing................................................................80

screenshot (K-monitor)..............................................117
seat belt.....................................................................145

checking..............................................................261

seat for passenger (if equipped)............................... 146
security function (engine start).................................. 182

setting on and off.................................................184

security setting (engine starting)............................... 134
selective catalytic reduction (SCR) muffler................129
service inspect indicator............................................ 119
service intervals........................................................ 249

setting screen (K-monitor)

calling up...............................................................82

shuttle button.............................................................157
shuttle lever...............................................................157
shuttle neutral button.................................................158
side cover..................................................................254
signal  socket  (ISO  standard  11786)(premium  and

premium KVT model only)...................................247

single line hydraulic trailer brake...............................154
sound volume setting (K-monitor Pro).........................82
specification table (tractor).......................................... 31
speed setting (engine rpm dual memory)..................141
speedometer............................................................. 182
spillage collector (remote couplers).......................... 228
spot light....................................................................240
stabiliser (if equipped)............................................... 203
steering

adjusting..............................................................147

stopper bolt (front wheel)

adjusting..............................................................233

sun roof..................................................................... 239
supply pump

checking..............................................................292

suspension hose (front suspension type)

replacing..............................................................294

swing drawbar........................................................... 206
switches...................................................................... 50
system basic settings (K-monitor Pro)........................ 82
system settings (K-monitor Pro).............................82,83

T

tachometer................................................................ 182
temperature control dial (air conditioner).................. 242
temperature of transmission (premium KVT model only)

............................................................................ 137

tie-rod dust cover

checking..............................................................266

time setting screen (K-monitor Pro)............................ 83
toe-in

adjusting..............................................................273
adjusting procedure.............................................273

top link................................................................203,212

selecting mounting holes.....................................201

towing a trailer.............................................................17
traction operation...................................................... 138
tractor

before operating....................................................13
boarding.............................................................. 143
detaching implement........................................... 205
driving on the road................................................ 15
leaving.................................................................143
operating............................................................... 14
operating on a road.............................................191
operating on slopes...............................................15
operating on slopes and rough terrain................ 191
operating techniques...........................................191
options.................................................................309

M7132, M7152, M7172

325

Summary of Contents for M7-132













































































































































































































































































































































Reviews:

No comments

Related manuals for M7-132

Jenn-Air TC707S Limited Warranty preview
TC707S
Brand: Jenn-Air Pages: 3
Case IH Farmall 105U Efficient Power Service Manual preview
Farmall 105U Efficient Power
Brand: Case IH Pages: 61
LAMBORGHINI R3 EVO 85 Workshop Manual preview
R3 EVO 85
Brand: LAMBORGHINI Pages: 61
Kubota STV32 Operator'S Manual preview
STV32
Brand: Kubota Pages: 102
Kubota MX5200 Operator'S Manual preview
MX5200
Brand: Kubota Pages: 115
Black Widow ATV-RAKE-2143 Instructions preview
ATV-RAKE-2143
Brand: Black Widow Pages: 4
Yancheng Tractor Factory Jinma 200 Series User Manual preview
Jinma 200 Series
Brand: Yancheng Tractor Factory Pages: 52
Power Step PSA-WA1200-FS Manual preview
PSA-WA1200-FS
Brand: Power Step Pages: 30
Ventrac KD482 Operator'S Manual & Parts Drawings preview
KD482
Brand: Ventrac Pages: 37
Cub Cadet 7254 Operator'S Manual preview
7254
Brand: Cub Cadet Pages: 52
Still CX-T-40 Original Instructions Manual preview
CX-T-40
Brand: Still Pages: 146
Cub Cadet YANMAR EX2900 Specifications preview
YANMAR EX2900
Brand: Cub Cadet Pages: 2
Cub Cadet 2176 Operator'S Manual preview
2176
Brand: Cub Cadet Pages: 60
Zetor FORTERRA 105 Operator'S Manual preview
FORTERRA 105
Brand: Zetor Pages: 197
Zetor FORTERRA HSX 100 Operator'S Manual preview
FORTERRA HSX 100
Brand: Zetor Pages: 250
Zetor HORTUS CL Series Operator'S Manual preview
HORTUS CL Series
Brand: Zetor Pages: 142
Zetor Proxima 100 Operator'S Manual preview
Proxima 100
Brand: Zetor Pages: 220
Toro 04720 Operator'S Manual preview
04720
Brand: Toro Pages: 12

Brands by name

Popular brands

Load more brands