Kubota M7-132, Operator'S Manual

Page: 238 / 332

(1) Jack point for tractor equipped with ladder hitch
(1) Jack point for tractor equipped with ladder hitch (view from be-
low)
(1) Jack point for tractor equipped with DROMONE auto hitch
(1) Jack point for tractor equipped with DROMONE auto hitch (view
from below)
3. Safe replacement of the wheel
The wheel is heavy. Take the following precautions
when removing the wheel.
1. Park the tractor on a solid, level place.
2. Apply the handbrake and use chocks.
3. In detaching the rear wheels, apply a wedge in
place to keep the front axle from oscillating.
4. Use a jack or the like that withstands the relevant
weight.
5. Use an appropriate tyre remover.
6. Tighten the bolts and nuts to their specified torques.
(1) Tyre remover
4. Treads
IMPORTANT :
• Front and rear treads cannot be adjusted.
• Always attach the wheels as shown in the
factory-shipment state, otherwise tractor parts
may be damaged.
• When re-fitting or adjusting a wheel, tighten the
bolts to the following torques then recheck after
driving the tractor 200 m (200 yards) and 10
times of shuttle movement by 5 m (5 yards), and
thereafter according to service interval.
TYRES, WHEELS AND BALLAST TYRES
232
M7132, M7152, M7172