Kubota M7-132, Operator'S Manual

Page: 108 / 332

2. Using the program select switch, choose the
program code . Every time the select switch is
touched, the program code alternates among , ,
', and ' in that order.
The program code display indicator lights up
interlocked with the program select switch.
(1) Headland management system lock indicator
(2) Program code display indicator
(3) Headland management system lock/unlock switch
(4) Program select switch
Recordable program
Type of work
Program se-
lect switch
Program Indicator
A
Code: Field out
Indicator
lights up and
the ● circle
lights up when
recording.
Code: Field in
Indicator
lights up and
the ● circle
lights up when
recording.
B
Code: ' Field out
Indicator '
lights up and
the ● circle
lights up when
recording.
Code: ' Field in
Indicator '
lights up and
the ● circle
lights up when
recording.
11.2 Recording the program through actual
tractor operation
1. Make sure the headland management system lock
indicator (5) is off.
2. Using the program select switch (2), be sure that
the program code (field out) is selected.
3. Touch the left half of the automatic record switch
(3), and the indicator (4) of this switch lights up to
show that the program is ready to be recorded.
Carry out actual work in accordance with the field
out operation procedure to record in the program.
4. In the monitor’s LCD screen, the subcategory icons
(7) get displayed one by one according to the
program recording order.
If the tractor stops and the procedure is still used,
the interrupt duration is recorded as lead time (8). If
the tractor travels and the procedure is continued,
the distance (9) is recorded.
5. With the field-out operating procedure completed,
touch the right half of the record switch (3) to end
the recording procedure.
Now the field-out operating procedure has been
recorded.
6. Next, using the program select switch (2), choose
the program code (field in).
7. Record the field-in operating procedure. Now the
recording for both the program codes and is
completed. But the program has not been saved
yet. Please do
“save” as described in a different
section.
(See Saving the program on page 103.)
(1) Headland management sys-
tem lock/unlock switch
(2) Program select switch
(3) Record switch
(4) Indicator
(5) Headland management sys-
tem lock indicator
(6) Program codes indicator
(7) Subcategory icon
(8) Pre-program lead time
(9) Pre-program travel distance
11.3 Pre-program lead time and pre-
program travel distance
The pre-program lead time and pre-program travel
distance refer to the standby time and travel distance
INTELLIPANEL
™
CONTROL K-MONITOR MAIN MENU ( PREMIUM AND PREMIUM KVT MODEL ONLY)
102
M7132, M7152, M7172