Kubota M7-132, Operator'S Manual

Page: 314 / 332

Engine con-
trol unit
Error or warning code
Type of trouble Action
SPN FMI
SC 520200 2
Operation error: auto steering
switch.
Turn on auto steering switch after engine start.
SC 520203 31
Safety function; auto steering
system.
Turn off auto steering switch.
SC 520210 30
Operation error: auto steering
switch may be stuck.
Turn on auto steering switch after engine start.
TCU 171 15
Transmission oil temperature is
too high. Stop tractor operation and allow transmission to
cool down.
TCU 171 16
Transmission oil temperature is
too high. Stop tractor operation and allow transmission to
cool down.
TCU 5140 2 Shuttle lever signal error.
Shut off the engine and restart.
Recheck operation and if problem persists, contact
your dealer.
TCU 5225 2
Long time clutch inching opera-
tion. Return the clutch pedal or shift shuttle lever to neu-
tral.
TCU 5226 2
Long time clutch inching opera-
tion. Return the clutch pedal or shift shuttle lever to neu-
tral.
TCU 5231 2 PTO clutch slippage.
Check PTO gear shift lever and PTO operating
mode select lever position. When turning on the
PTO switch, set both levers to selected position.
TCU 5711 2 Shuttle button signal error.
Check if the shuttle button of EZ-command centre
was held down for a long time.
Otherwise, contact your dealer.
TCU 524193 17 Transmission oil is too cold.
Warm up the transmission oil by increasing engine
rpm.
TCU 524193 18 Transmission oil is too cold.
Warm up the transmission oil by increasing engine
rpm.
TCU 524218 12
Operational error; shuttle lever
operation with parking brake ap-
plied.
Release the parking brake while shuttle lever is in
operation.
VDC 520323 10
Operational error; long time brake
pedal switch left activation.
Safely release the brake pedal.
If the error message persists even if the brake pedal
is released, contact your dealer.
VDC 520324 10
Operational error; long time brake
pedal switch right activation.
Safely release the brake pedal.
If the error message persists even if the brake pedal
is released, contact your dealer.
VDC 521005 19
Operational error; PTO lever and
PTO switch.
Check PTO gear shift lever and PTO operating
mode select lever position. When turning on the
PTO switch, set both levers to selected position.
VDC 521049 19
Data input error of tyre circumfer-
ence.
Check the setting of the tire circumference figure.
VDC 521280 31 Operation error: shuttle lever.
Return the shuttle lever to neutral once, then shift
the lever again.
VDC 521280 31 Operation error; shuttle lever. Shift the shuttle lever again.
VDC 521289 31
Operational error; PTO lever and
PTO switch.
Check PTO gear shift lever and PTO operating
mode select lever position. When turning on the
PTO switch, set both levers to selected position.
eTCV 1067 2 Brake pedal sensor error
Please slightly weaken the depression on the brake
pedal during full brake. If the problem persists, con-
tact your KUBOTA dealer.
TROUBLESHOOTING
308
M7132, M7152, M7172