Kubota M7-132, Operator'S Manual

Page: 228 / 332

free to extend or retract, letting an implement such
as a loader bucket follow the ground.
1.3 Flow control valve
WARNING
To avoid the possibility of personal injury or death
be aware of the following when making
adjustments:
• The 3-point hitch operation is influenced by the
combination of the adjustment of the flow
control valve and the engine speed.
• The 3-point hitch may rise slowly or not at all at
low engine rpm.
• The 3-point hitch may rise suddenly if engine
rpm is increased or if flow control adjustment is
changed.
(1) Remote control valve with flow control
(2) Remote control valve with flow control
(3) Flow control knob for valve (1)
(4) Flow control knob for valve (2)
Adjusting the flow rate:
The flow rate for the remote control valve can be
adjusted.
1. Turn the flow control knob anticlockwise (+), and the
flow rate for the remote control valve increases. A
clockwise turn (-) of the knob causes the flow to
decrease. If the knob is turned all the way (A), there
will be no flow.
2. To adjust the flow rate, set the engine speed to the
operating rpm, turn the flow control knob once all
the way clockwise (A), and then turn it gradually
anticlockwise until a required flow rate is reached.
IMPORTANT :
• When there is no need to adjust the flow
rate, turn the flow control knob all the way
anticlockwise and keep it in this position.
(1) Remote control valve with
flow control
(2) Flow control knob for valve
(+) “INCREASE”
(-)
“DECREASE”
(A) “STOP”
1.4 Remote control valve lever
The remote control valve lever directs pressurised oil
flow to the implement hydraulic system.
Each lever can be switched among its 4 positions.
Set the lever to the
“FLOAT” position, and the lever is
kept at that position.
(1) Remote control valve lever (A) “EXTEND”
(B) “RETRACT”
(N) “NEUTRAL”
(C) “FLOAT”
HYDRAULIC UNIT REMOTE HYDRAULIC CONTROL SYSTEM
222
M7132, M7152, M7172