Kubota M7-132, Operator'S Manual

Page: 262 / 332

1. Turn the key switch to “ON” , and 1 minute later,
inspect by touch whether the heater is working. If
the heater is working, its temperature will rise to
roughly 70
℃ (158 ℉ ), so you will be able to feel its
warmth.
2. If the heater is not warm, it is not working. In this
case, contact your local KUBOTA Dealer without
starting the engine.
(1) Heater
NOTE :
• Refer to the following figure for the heater
inspection position.
(1) Heater
4. Checking DEF/AdBlue
®
level and
adding fluid
WARNING
To avoid personal injury or death:
• Before adding DEF/AdBlue
®
, stop the engine.
When adding the fluid, preferably wear
protective goggles and rubber gloves.
NOTE :
• The DEF/AdBlue
®
tank cap is blue. Be careful
not to confuse it with the fuel tank cap.
Look at the DEF/AdBlue
®
gauge on the instrument
panel to see how much fluid remains. If the level is too
low, add DEF/AdBlue
®
as required.
Before removing the DEF/AdBlue
®
cap, clean dirt away
from the caps and the tank openings.
If the fluid runs short or poor-quality fluid is added, a
warning sign appears on the instrument panel. If this
warning is ignored and the operation continues, the
engine output will be limited.
(See Warning indication and countermeasures on page
130.)
(1) DEF/AdBlue
®
tank
(2) Tank cap (blue)
(1) DEF/AdBlue
®
gauge
(2) DEF/AdBlue
®
warning indicator
(3) DEF/AdBlue
®
system warning indicator
(1) Drain plug
PERIODIC SERVICE DAILY CHECK
256
M7132, M7152, M7172