(1) Distance measuring
How to measure distance
1. Press the
[Select]
switch to select the distance
measurement icon on the meter panel (highlighted).
In that state, press and hold the
[ENT]
switch to
enable distance measurement.
2. Press the
[ENT]
switch to start distance
measurement. Press the
[ENT]
switch again to stop
distance measurement.
(1) “Distance measurement stopped”
(2) “Measurement distance”
3. To reset the measured value to zero, press and
hold the
[SET UP/00]
switch while distance
measurement is enabled.
4. Press
[ESC]
switch to return to the normal screen
and stop distance measurement. Also, after
stopping distance measurement, the measured
value can be reset to zero by holding down the
[SET
UP/00]
switch
while
the
distance
measurement icon on the performance monitor in
the meter panel is selected.
INTELLIPANEL
™
CONTROL
LIQUID CRYSTAL DISPLAY (LCD)
72
M7132, M7152, M7172
Summary of Contents for M7-132
