Kubota M7-132, Operator'S Manual

Page: 69 / 332

5. Setting the “Minute” of the clock:
a. Select with the [Select] switch and then
press the [ENT] switch to choose the “Minute”
(highlighted).
b. Carry out the “Minute” setting in the same way
as the “Hour” setting.
c. With the “Minute” setting made, select [Set] with
the [Select] switch and then press the [ENT]
switch. The clock is now completely set and the
setting mode screen appears again.
1.2 Setting the clock display ON/OFF
1. Press the [Select] switch to choose “Clock ON/OFF
setting” . Then press the [ENT] switch, and the clock
ON/OFF setting screen appears.
(1) Clock ON/OFF setting
(1) Clock ON/OFF setting screen
2. Press the [Select] switch and select or . Then
press the [ENT] switch to select clock display ON of
OFF.
3. Select [Set] with the [Select] switch and then press
the [ENT] switch. The ON/OFF setting has been
made and the setting mode screen appears again.
1.3 Setting the working range of implement
1. Press the [Select] switch to choose “Working range
of implement” . Then press the [ENT] switch, and
the implement working range setting screen
appears.
(1) Working range of implement
(1) Implement working range setting screen
2. Press the [Select] switch and select or . Then
press the [ENT] switch to choose “Working range of
implement” .
3. Select [Set] with the [Select] switch and then press
the [ENT] switch. The setting is made and the
setting mode screen appears again.
4. Press the [ESC] switch, and the normal screen
reappears.
2. Setting the power shift
transmission (Standard model)
Various settings of the automatic power shift
transmission can be made and checked.
2.1 Setting the automatic gear shift (road
mode)
Referring to the travelling speeds chart, determine the
maximum and minimum gear shifts that are best suited
for the job in question.
1. Turn on the key switch.
2. Press the
[SET UP/00] switch to make the setting
mode screen appear.
LIQUID CRYSTAL DISPLAY (LCD) INTELLIPANEL
™
CONTROL
M7132, M7152, M7172
63