manualshive.com logo in svg

Kubota M7-132, Operator'S Manual

Share
Download
Kubota M7-132 Operator'S Manual Download Page 119

12. Operating conditions

The  tractor  is  equipped  with  one  set  of  screens  which  automatically  record  information  arbitrarily  set  from  among
some 18 types of operation information such as fuel consumption, time worked, work efficiency and so on, and one
screen for information display only.

12.1 Calling up the data screen and preparation

(1) Operating conditions indicator
(2) Data record status indicator
(3) Screen number
(4) Free text box

(5) Working range of implement
(6) Recorded data
(7) Screen scroll switch
(8) Reset switch

(9) Edit switch
(10) Record start switch and stop switch
(11) Record conditions switch

K-monitor

K-monitor Pro

1. Select the screen to be used for recording with the scroll switch (7).

The recording screen has 11 pages available (screens 1 to 11). Screen 0 is for information display only.

2. Touch the reset switch (8) to delete the recorded data from the screen.
3. Enter field names and so on into the free text box (4) as necessary.
4. Touch the free text box and use the displayed ten-key pad for input.
5. Touch the working range of implement icon (5) to enter the working range of the implement, using the displayed

ten-key pad.
If the working range of the implement is not correctly entered, accurate data will not be recorded.

6. Touch the edit switch (9) to switch to the edit screen.

K-MONITOR MAIN MENU (

PREMIUM

 AND 

PREMIUM KVT

 MODEL ONLY)

INTELLIPANEL

™

 CONTROL

M7132, M7152, M7172

113

Summary of Contents for M7-132













































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands