Kubota M7-132, Operator'S Manual

Page: 106 / 332

10.3 Modifying the CVT low-range
maximum speed setting
1. Touch the CVT low-range maximum speed control
and the setting screen shows up.
(1) CVT low-range maximum speed control
2. Slide the CVT low-range maximum setting control
graph farther to the right (increasing value) to
increase the travelling speed available in the low
speed range. The travelling speed in the low-speed
range may be preset up to 20 km/h (12.4 mph).
This setting cannot be modified for the high-speed
range.
3. Press the previous screen resume switch and the
setting is saved and the previous screen reappears.
(1) CVT low-range maximum speed control graph
(2) Previous screen resume switch
10.4 Cruise control speed setting
Details regarding how to modify the cruise control
speed settings can be found in a different section.
(See Cruise control on page 176.)
10.5 Setting the engine rev-limit
1. Touch the engine rev-limiter control, and the setting
screen shows up.
(1) Engine rev-limiter control
2. Slide the engine rev-limit control graph to the right
(increasing the value) to increase the engine rev-
limit.
3. When the rpm is set at maximum, the rev-limiter
control is cancelled.
4. Press the previous screen resume switch, and the
setting is saved and the previous screen reappears.
(1) Engine rev-limiter control graph
(2) Previous screen resume switch
10.6 Setting the engine rpm memory
1. Touch the target engine rpm point on the engine
rpm memory control graph, and the slider will move
to the touched point.
2. With the “Plus (+)” or “Minus (-)” switch, finely adjust
the rpm memory setting.
Every time the switch is pressed, the speed varies
in 10-rpm increments or decrements.
INTELLIPANEL
™
CONTROL K-MONITOR MAIN MENU ( PREMIUM AND PREMIUM KVT MODEL ONLY)
100
M7132, M7152, M7172