Kubota M7-132, Operator'S Manual

Page: 169 / 332

Premium model
(1) Ez-command centre
(2) Shuttle enable button
(3) Range gear shift button
(4) Auto shift button (5) Shuttle neutral button
(6) Transmission mode select
switch
Travelling speed limit
When the left and right brake pedal interlock is
released, the travelling speed is limited to 40 km/h.
To cancel the travelling speed limit, stop the tractor and
interlock the left and right brake pedals.
1. Switching the operation modes
When the engine gets started, the “manual” mode is
selected all the time. By stepping on the clutch pedal,
the minimum travelling speed (A-1) is automatically
selected. To operate the machine in the auto shift
mode, press the auto shift button to switch to the
“auto
shift” mode.
Every time the auto shift button is pressed, the auto
shift mode and the manual mode are switched
alternately. Which mode is now on can be checked with
the LCD indicator on the instrument panel.
However, when the gear shift range in auto shift mode
memory is other than the minimum gear shift (A-1), it
will not switch to auto shift mode even when you press
the auto shift button.
After switching the main gear shift and range gear shift
with the ez-command centre until within the gear shift
range in memory, press the auto shift button to switch
to auto shift mode.
Example:
When the gear shift range in auto shift mode memory is
B-1 to B-3
Current gear shift Press the auto shift button
A-1 Does not switch to auto shift mode
B-1 or B-2 or B-3 Switches to auto shift mode
B-4 Does not switch to auto shift mode
Standard model
(1) Ez-command centre
(2) Auto shift button (A) “PUSH”
Premium model
(1) Ez-command centre
(2) Auto shift button (A) “PUSH”
NOTE :
• The auto shift button functions without any
clutch operation, whether the machine is
running or at a stop.
• When the engine stops during work, the gear
shift previous to the stop will be selected if you
step on the clutch pedal after restarting without
turning the key switch off. If you turn the key
switch off before restarting, the minimum gear
shift (A-1) will be selected.
2. Switching the auto shift modes
According to the type of work, switch the transmission
mode select switch to the
“road” mode or “field” mode.
The currently enabled mode can be checked with the
LCD indicator on the instrument panel.
Before switching the modes, get the engine started first
and then set the shuttle lever to the neutral position.
POWER SHIFT TRANSMISSION CONTROL OPERATING THE TRACTOR
M7132, M7152, M7172
163