manualshive.com logo in svg

Kubota M7-132, Operator'S Manual

Share
Download
Kubota M7-132 Operator'S Manual Download Page 157

(1) Front work light switch (engine bonnet)
(2) Front work light switch (sides of the CAB)
(3) Front work light switch (roof of the CAB)
(4) Rear work light switch (roof of the CAB)
(5) Rear work light switch (rear of the CAB)
(6) Indicator

(1) Front work light (engine bonnet)
(2) Front work light (sides of the CAB)
(3) Front work light (roof of the CAB)

(1) Rear work light (roof of the CAB)
(2) Rear work light (rear of the CAB)

4. Beacon light switch

Turn  on  the  key  switch  and  press  the  beacon  light
switch. The beacon light and the switch’s indicator light
up.
Press the beacon light switch, and turn off the light and
the indicator.

(1) Beacon light switch
(2) Indicator

BRAKE CONTROLS

This  machine  is  equipped  with  the  following  types  of
brakes.
Handle appropriately, referencing this manual with your
tractor and attached implement(s).

1. Foot brake

 WARNING

To avoid personal injury or death:

• Be  sure  to  interlock  the  right  and  left  pedals.

Applying  only  one  rear  wheel  brake  at  high
speeds  could  cause  the  tractor  to  swerve  or
roll-over.

• Be  sure  brake  pedals  have  equal  adjustment

when  using  locked  together.  Incorrect  or
unequal  brake  pedal  adjustment  can  cause  the
tractor to swerve or roll-over.

• Be 

aware 

of 

the 

enhanced 

braking

characteristics of 4-wheel braking system.
Appropriate  care  should  be  taken  during  hard
braking and/or when pulling towed loads.

• Do not brake suddenly.

An  accident  may  occur  as  a  result  of  a  heavy
towed load shifting forward or loss of control.

• To  avoid  skidding  and  loss  of  steering  control

when  driving  on  icy,  wet,  or  loose  surfaces,
make  sure  the  tractor  is  correctly  ballasted,
operated at reduced speed, operated with front-
wheel drive engaged (if equipped).

• The  braking  characteristics  are  different

between a 2 and 4-wheel drive. Be aware of the
difference and use carefully.

• Engage 4-wheel drive for 4-wheel braking when

travelling down a slope.

1. Before operating the tractor on the road, be sure to

interlock  the  right  and  left  pedals  as  illustrated
below.

LIGHT CONTROLS

OPERATING THE TRACTOR

M7132, M7152, M7172

151

Summary of Contents for M7-132













































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands