Kubota M7-132, Operator'S Manual

Page: 258 / 332

LUBRICANTS, FUEL AND COOLANT
No. Locations
Capacities
Lubricants
M7132 M7152 M7172
1 Fuel 330 L
No.2-D S15 diesel fuel
No.1-D S15 diesel fuel if temperature is below -10
℃
2 DEF/AdBlue
®
38 L
3 Coolant 24 L Fresh clean soft water with antifreeze
4 Washer liquid 2 L Car washer liquid
5
Engine crankcase (with
filter)
22 L
• Engine oil:
API Service Classification
CJ-4 (DPF type engine)
Above 25 ℃
SAE30, SAE10W-30 or
15W-40
-10 to 25 ℃ SAE10W-30 or 15W-40
Below -10 ℃ SAE10W-30
6 Transmission case
Power shift model: 85 L
CVT model: 80 L
KUBOTA UDT fluid*
7 Rear axle case oil 10 L for each side
• KUBOTA UDT fluid* or KUBOTA 80W-90 gear lubricant HD
or KHD
8 Front differential case oil 8.5 L
9 Front axle gear case oil 2.1 L for each side
10 Front PTO case 2.7 L • KUBOTA UDT fluid*
11
Greasing No. of greasing points Capacity Type of grease
Top link 2
Until grease overflows.
Multipurpose grease NLGI-2 or
NLGI-1(GC-LB)
Lift rod 4
Stabiliser 2 (with automatic stabiliser)
Universal joint (front
axle drive shaft)
1
Front axle support 2
Hydraulic lift cylinder pin 4
Hydraulic lift arm shaft 2
Parking brake shaft 2
Front 3-point hitch (if
equipped)
7
Battery terminal 2 A small amount
NOTE :
• The product name of KUBOTA genuine UDT fluid may be different from that in the operator’s manual
depending on countries or territories. Consult your local KUBOTA Dealer for further details.
Engine oil
• The oil used in the engine should have an American Petroleum Institute (API) service classification and proper
SAE engine oil according to the ambient temperatures shown in the previous table.
• Refer to the following table for the suitable API classification engine oil according to the diesel particulate filter
(DPF) type engines and the fuel.
Fuel used
Engine oil classification (API classification)
Oil class for engines with DPF
Ultra Low Sulphur fuel
(<0.0015% (15 ppm))
CJ-4
MAINTENANCE LUBRICANTS, FUEL AND COOLANT
252
M7132, M7152, M7172