Kubota M7-132, Operator'S Manual

Page: 225 / 332

2. Press the “LOWER” switch, and the indicator goes
off and the implement comes down.
When the
“RAISE” switch has been pressed to
raise the implement, the depth control dial cannot
function.
Standard model
3-point quick raise switch
3-point quick lower switch
(A) “PUSH”
Premium, Premium KVT model
3-point quick raise switch
3-point quick lower switch
(A) “PUSH”
All models
(1) 3-point lifting and lowering indicator
NOTE :
• 3-point hitch working range:
Set the depth control dial for a bottom limit
and the lift arm top limit adjustment dial or
switch for a top limit. The 3-point quick raise
and lower switches are controls for the
raising and lowering within the limits set by
the depth control dial and the lift arm top
limit adjustment dial or switch.
• One-touch floating function:
Hold down the “LOWER” switch to keep the
3-point hitch floating. This function is
helpful in ploughing, for example. Release
the switch and the 3-point hitch returns to
the draft control position.
• “RAISE” and “LOWER” operation with the 3-
point hitch going halfway:
a. When the “RAISE” or “LOWER” switch is
pressed with the 3-point hitch going up
halfway, the 3-point hitch stops at this
position (the indicator starts blinking).
Re-push the “RAISE” or “LOWER”
switch, and the 3-point hitch will go up
or down respectively.
b. To lower the 3-point hitch with the 3-
point hitch going up halfway, hold down
the “LOWER” switch for 2 seconds or
push it twice.
c. When the “RAISE” switch is pressed
with the 3-point hitch going down
halfway, the 3-point hitch goes up.
12. 3-point hitch’s position lock
Activating the lock
If any of the following actions are made with the depth
control dial and the lower links at different heights, the
position lock is activated. The 3-point hitch control is
interrupted and the 3-point lifting and lowering indicator
starts flashing (2 or so flashes every second).
1. Starting the engine.
2. Activating the 3-point remote hitch up or down
switch.
3. Unlocking the 3-point hitch lock button.
Releasing the lock
1. If applied, press the 3-point quick raise switch or 3-
point quick lower switch.
2. Turn the depth control dial to the same level as the
lift arm height.
NOTE :
• When the position lock is released with the 3-P.
quick raise or lower switches, the 3-point hitch
goes up or down.
3-POINT HITCH CONTROL SYSTEM HYDRAULIC UNIT
M7132, M7152, M7172
219