Kubota M7-132, Operator'S Manual

Page: 271 / 332

1.8 Testing operator presence control
(OPC) system (Standard, Premium models)
(1) Shuttle lever
(2) Clutch pedal
(3) Liquid crystal display
1. Follow the instructions about parking the tractor.
(See PARKING THE TRACTOR on page 16.)
2. Sit on the operator’s seat.
3. After starting the engine, release the clutch pedal.
4. Shift the shuttle lever to the forward or reverse
position.
5. Check on the LCD monitor that the shuttle shift
returns automatically to the neutral position when
you stand up.
6. After sitting down, step on the clutch pedal.
7. Check on the LCD monitor that the shuttle shift
selected in step 4 (forward or reverse) is
automatically selected.
8. If any trouble occurs, consult your local KUBOTA
Dealer for this service.
1.9 Testing operator presence control
(OPC) system (Premium KVT model)
(1) Shuttle lever
(2) Clutch pedal
(3) Liquid crystal display
1. Follow the instructions about parking the tractor.
(See PARKING THE TRACTOR on page 16.)
2. Sit on the operator’s seat.
3. After starting the engine, release the clutch pedal.
4. Check on the LCD monitor that when you are
standing, the gearshift will remain in neutral even if
you try to shift gears with the shuttle lever to the
forward or reverse position.
5. If any trouble occurs, consult your local KUBOTA
Dealer for this service.
2. Checking wheel bolt torque
WARNING
To avoid personal injury or death:
• Never operate the tractor with a loose rim,
wheel or axle.
• Any time bolts and nuts are loosened, retighten
to the specified torque.
• Check all bolts and nuts frequently and keep
them tight.
Check wheel bolts and nuts regularly, especially when
new. If they are loose, tighten them as follows.
Flange type
(1) 540 N ⋅ m / 55.1 kgf ⋅ m / 398 ft ⋅ lbs
(2) 670 N ⋅ m / 68.3 kgf ⋅ m / 494 ft ⋅ lbs
EVERY 50 HOURS PERIODIC SERVICE
M7132, M7152, M7172
265