Kubota M7-132, Operator'S Manual

Page: 203 / 332

6. Auto PTO operation (Premium, Premium KVT models)
The rear-PTO can be pre-set to turn itself on and off, being interlocked with the lifting height of 3-point hitch mounted
implement.
WARNING
To avoid personal injury or death:
• Use caution when setting auto engagement, considering the type of implement in use.
Setting
1. Touch the left half of the auto PTO switch (6), and
the setting is enabled. By touching the right half of
the switch, and the setting is disabled.
While the auto PTO switch (6) is on, the auto PTO
indicator (11) also lights up.
2. Use the plus and minus switches (7 and 8) to
readjust the height for turning on the PTO in
lowering the implement and the height for turning it
off in raising the implement.
(See Setting the PTO on page 92.)
NOTE :
• When PTO turning has been stopped by the
auto PTO function, the PTO indicator on the
instrument panel blinks and the buzzer
keeps sounding.
The PTO starts turning by lowering the
implement with the 3-point quick lower
switch or depth control dial.
(1) Front PTO indicator
(2) Front PTO rpm
(3) Rear PTO indicator
(4) Rear PTO rpm
(5) Height to turn on the PTO in lowering the implement
(6) Auto PTO switch (7) Plus (+) switch
(8) Minus (-) switch
(9) Height to turn off the PTO in raising the implement
(10) Current lift arm height
(11) Auto PTO indicator
REAR PTO OPERATION PTO
M7132, M7152, M7172
197