Kubota M7-132, Operator'S Manual

Page: 215 / 332

(1) Auto hitch release lever (A) “PULL”
3. With the auto hitch release lever being pulled, move
the depth control dial to lower the auto hitch.
(1) Auto hitch
(2) Towing hook
(3) Latch hook
(4) Latch bar
To extend or retract the hitch
1. Operate the relevant remote control valve lever or
switch to extend or retract the hitch.
2. Attach or detach an implement.
(1) Remote control valve lever
(2) Remote control valve switch
(1) Hitch
To lift the hitch
1. Make sure the implement is securely attached or
detached. Turn the depth control dial fully clockwise
to lift the auto hitch until the latch hooks tightly
catch the latch bar.
(1) Latch hook
(2) Latch bar
2. Slightly turn the depth control dial anticlockwise to
be sure that the auto hitch does not move down.
IMPORTANT :
• In pulling an implement, slightly turn the depth
control dial anticlockwise to have the hydraulic
system free of load.
To change the towing hook or drawbar
1. Operate the relevant remote control valve lever or
switch to extend the hitch.
2. Remove the pivot pin and change the towing hook
or the drawbar.
TYPE B (HITCH MADE BY DROMONE) 3-POINT HITCH AND DRAWBAR
M7132, M7152, M7172
209