Kubota M7-132, Operator'S Manual

Page: 241 / 332

(1) 350 N ⋅ m (35.7 kgf ⋅ m)
(2) 670 N ⋅ m (68.3 kgf ⋅ m)
DUAL TYRES (IF EQUIPPED)
Dual wheels may be used on the rear axles of tractors
for the purpose of flotation or soil compaction reduction
only. They are recommended for use in the field.
When travelling on road, you must comply with local
regulations at all time.
IMPORTANT :
• Do not install dual wheels on the front axle.
1. Bar type axle
Attach the wheels onto the rear axle.
2. Flange type axle
A dual-tyre adapter mounted to the tractor’s rear wheel
flange is available as an option.
BALLAST
WARNING
To avoid personal injury or death:
• Additional ballast will be needed for
transporting heavy implements. When the
implement is raised, drive slowly over rough
ground, regardless of how much ballast is used.
• Do not fill the front wheels with liquid to
maintain steering control.
1. Front ballast
Add weights if needed for stability and improved
traction.
Heavy pulling and heavy rear mounted implements
tend to lift up the front wheels.
Add enough ballast to maintain steering control and to
prevent tipping over. Remove the weight when it is no
longer needed.
1.1 Front end weights (option)
Front end weights can be attached to the bumper.
See your implement operator’s manual for required
number of weights or consult your local KUBOTA
Dealer about their usage.
(1) Front end weights
(2) Bumper
IMPORTANT :
• Do not overload tyres.
• Add no more weight than indicated in chart.
• Do not attach the front bumper when the front
loader is attached.
Maximum weight 45 kg x 14 pieces
2. Rear ballast for single tyres
Add weight to rear wheels if needed to improve traction
or for stability.
The amount of rear ballast should be matched to job
and the ballast should be removed when it is not
needed.
The weight should be added to the tractor in the form of
liquid ballast, rear wheel weights or a combination of
both.
DUAL TYRES (IF EQUIPPED) TYRES, WHEELS AND BALLAST
M7132, M7152, M7172
235