Kubota M7-132, Operator'S Manual

Page: 253 / 332

(1) Loader electrical power socket
NOTE :
• Please refer to front loader operator’s manual
for details regarding the electric wiring
connection.
4. ISOBUS monitor socket (Premium
and Premium KVT model only)
An implement monitor meeting ISO Standard 11783
may be connected to the socket.
(1) ISOBUS monitor socket
5. Signal socket according to ISO
standard 11786 (Premium and
Premium KVT model only)
When connecting the connectors of implements
meeting ISO standard 11786 to this socket, the
following signals will be transmitted from the tractor to
the implement.
Based on the transmitted signals, the tractor can
control implement operations including stopping,
operation restart, adjustment of dispersal amount
(fertilizer, for example) and others.
NOTE :
• Implement side default settings are required to
adjust the dispersal amount etc.
Signals from the signal socket
No. Output signals Remarks
1 Actual travelling speed
Operation with GPS moun-
ted
2 Travel speed
Speed calculated from en-
gine rpm and so on
3 Rear PTO rpm
4 Operating or halted
When raising lift arm:
operation halted
When lowering lift arm:
operating
5 Rear 3-point hitch position
Lift arm height displayed by
voltage
6 Power supply (5 A)
7 Ground
(1) Signal socket
6. Cigarette lighter
Push the lighter knob down to activate, with the key
switch in the
“ON” or “ACC” positions.
Lighter will move up when ready to use.
(1) Cigarette lighter
NOTE :
• An electrical consumer with a requirement for
maximum 120 watts can be connected to the
cigarette lighter.
ACCESSORIES CAB OPERATION
M7132, M7152, M7172
247