2. With the
[Select]
switch, choose the
“service
inspect indicator”
. Then press the
[ENT]
switch.
(1) [Set UP/00] switch
(2) [Select] switch
(3) [ENT] switch
(1) Setting mode screen
(2) Service inspect indicator
3. The 10 maintenance items are displayed on the
LCD unit.
The hours shown at the far right of each item
indicate the duration of use after the immediately
previous maintenance.
(1) Engine oil filter
(2) Fuel filter
(3) Hydraulic suction oil filter (3-
point hitch)
(4) Transmission filter
(5) Transmission fluid
(6) Rear axle case oil
(7) Front axle case oil
(8) Wheel bolt torque
(9) Engine oil separator element
(10) Engine oil
Every time the
[Select]
switch is pressed, the circle
( ) moves down and the next items appear one by
one.
Highlighted hours mean that the inspection interval
or replacement interval has been reached.
Immediately inspect the relevant part or replace it
with a new one.
PRE-OPERATION CHECK
SERVICE INSPECT INDICATOR
120
M7132, M7152, M7172
Summary of Contents for M7-132
