background image

Congratulations, and welcome to the fabulous world of KIOTI CK25, CK30 ownership,where serious work is
made fun again!
This versatile tractor is a culmination of the entire tractor and diesel knowledge gained by the Daedong
Industrial Co.,LTD 
over the years since 1947 and has been designed with the finest materials and under

rigid quality control standards set forth by the KIOTI Engineering Department.

Knowledge of tractor operation is essential for many years of dependable service and reliability. to help new
owners familiarize themselves with the KIOTI CK25, CK30, it is the policy of KIOTI tractor to provide an
owner’s manual which includes helpful information about tractor safety, operation and maintenance. If the
information you seek is not found in this manual,your KIOTI  tractor dealer will be happy to help you. please
feel free to contact DAEDONG-USA,INC. with your questions/concerns. Throughout this manual you will see
text in bold type, preceded by the words DANGERWARNINGCAUTION or IMPORTANT.
Such text has the following significance.

Signs

Description

DANGER

WARNING

CAUTION

IMPORTANT

This mark indicates hazardous situation which, if not observed, may result in death or
fatal injury. This mark should be indicated for most dangerous situations only.

This mark indicates potentially hazardous situation which, if not observed, may result in
minor or moderate injury. And this mark can be used as a warning against unsafe activities.

This mark indicates emphasis on notable characteristics of working procedures, and
information on about technology for easier operation.

This mark indicates potentially hazardous situation which, if not observed, may result in
death or moderate injury.

FOREWORD

Summary of Contents for CK25

































































































































Reviews: