Kubota M7-132, Operator'S Manual

Page: 190 / 332

2. Setting “ON” and “OFF ” the
engine start security function (“OFF”
by default)
The following shows the “ON” and “OFF” status of the
engine start security function.
“ON” status
The engine will not start unless the password number is
entered. The engine can be restarted without entering
the password number when it is within 10 minutes after
turning the key switch
“OFF” . When the battery is
removed, you must enter the password number even
within 10 minutes after turning the key switch
“OFF” .
“OFF” status
The engine can be started after turning the key switch
“ON” without requiring the password number.
1. If the password has been set, enter the password
number.
2. Press the [SET UP/00] switch, and choose Security
screen.
3. Press [Select] switch to select “Security” and then
press the [ENT] switch
4. The screen will switch to the theft prevention
function screen, so press [Select] switch to select
“Security” and hold down the [ENT] switch
5. Enter the 3-digit password number on the password
number input screen.
(See Entering the password number on page 182.)
6. After entering the password, one of the following
screens will be displayed.
Press the
[Select] switch to select “ON” or “OFF” .
7. After selecting, hold down the [ENT] switch.
• When you switch the security function “OFF” ,
check that “OFF” is lit.
• When you switch the security function “ON” ,
check that “ON” is lit.
8. After completing the setting, the screen returns to
the theft prevention selection status on the “various
settings” screen.
3. Changing the password number
1. If the password has been set, enter the password
number.
2. Press the [SET UP/00] switch, and choose Security
screen.
3. Press [Select] switch to select “Security” and then
press the [ENT] switch.
OPERATING THE TRACTOR ENGINE START SECURITY FUNCTION
184
M7132, M7152, M7172