Kubota M7-132, Operator'S Manual

Page: 269 / 332

5. Press the 3-point hitch lock button to get the hitch
locked (the indicator in the switch lights up).
6. Make sure that the implement cannot be raised or
lowered even with the 3-point quick raise and lower
switch or the depth control dial.
7. Release the 3-point hitch lock button to get the hitch
unlocked (the indicator in the switch goes off).
8. Move the 3-point quick raise and lower switch or the
depth control dial, and make sure the implement is
raised and lowered.
9. If any trouble occurs, consult your local KUBOTA
Dealer for this service.
1.5 Testing remote hydraulic control
(Premium, Premium KVT models)
(1) Parking/secondary brake lever
(2) Remote control valve switch
(3) Remote control valve lock button
1. Follow the instructions about parking the tractor.
(See PARKING THE TRACTOR on page 16.)
2. Sit on the operator’s seat.
3. Depress the clutch pedal fully.
4. Start the engine.
5. Press the remote control valve lock button to get
the valve locked (the indicator in the switch lights
up).
6. Move the implement-linked remote control valve
switch, and make sure the implement is not moved.
7. Press the remote control valve lock button to get
the valve unlocked (the indicator in the switch goes
off).
8. Move the remote control valve switch, and make
sure the implement is moved.
9. If any trouble occurs, consult your local KUBOTA
Dealer for this service.
1.6 Testing external rear PTO switch
control
Standard model
(1) Parking/secondary brake lever
(2) PTO operation mode selection lever
(3) PTO speed selection lever
Premium, Premium KVT models
(1) Parking/secondary brake lever
(2) PTO operation mode selection lever
(3) PTO speed selection lever
(1) External switch for rear PTO
1. Follow the instructions about parking the tractor.
(See PARKING THE TRACTOR on page 16.)
2. Make sure the PTO drive shaft is disconnected from
attached implement.
3. Start the engine.
EVERY 50 HOURS PERIODIC SERVICE
M7132, M7152, M7172
263