Kubota M7-132, Operator'S Manual

Page: 123 / 332

2. Touch the export switch on the display to show 3
types of exportable data.
Check off the items you want to export by touching
them.
(1) Export switch
(2) Import switch
3. Touch the export switch to export to the USB
memory stick.
4. Touch the return switch to go back the previous
screen.
(3) Export switch
(4) Return to the previous screen switch
4.2 Importing procedure
1. After setting the USB memory stick in the K-
monitor, touch the floppy mark in the display and
then the import switch.
2. Use the scroll switch to select data to import from
the USB memory stick data at the top of the screen.
3. Touch the import switch to copy the data.
Further, note that when importing, the data within
the K-monitor will be overwritten by the USB
memory stick data selected in the previous step.
However, the top limit setting value of the lift arm
top limit cannot be imported.
(1) USB memory stick data
(2) Scroll switch
(3) Import switch
(4) Return to the previous screen switch
5. Screenshot
The screen data information set on each screen can be
exported as graphic data (jpg format).
For example, if you export the details on the PTO or
remote control valves set by implement as screenshots,
resetting is simple.
Exporting procedure
1. Display onscreen the information of which you want
screenshots.
2. Set the USB memory stick.
3. Touch the camera icon at the top of the screen to
copy the data to the USB memory stick.
(1) Camera icon
K-MONITOR SUB-MENU ( PREMIUM AND PREMIUM KVT MODELS ONLY) INTELLIPANEL
™
CONTROL
M7132, M7152, M7172
117