2. The person on the passenger seat is supposed to
open the door, unfasten the seat belt and get out of
the tractor.
3. Rewind the seat belt back into its case.
NOTE :
• The passenger seat can be used only when
permitted by your local laws. Consult your local
KUBOTA Dealer for further details.
• The passenger seat conforms to the EC
regulations.
5. Steering adjustment
CAUTION
To avoid personal injury:
• Do not adjust the steering wheel while the
tractor is in motion.
Press down the steering wheel lock pedal, to release
the lock so the steering wheel can be adjusted to the
desired position.
(1) Lock Pedal
(A) “UNLOCK”
(B) “LOCK”
6. Extendable mirror
1. To alter the length: Loosen the knob bolt and move
the mirror to the required position, then tighten the
knob bolt.
2. To adjust mirror head: Hold firmly, tilt horizontally
and vertically as required.
(1) Knob bolt
7. 2-sided mirror
A 2-sided mirror which greatly enlarges the field of view
on both sides of the tractor is provided as standard
equipment.
Adjust the angle of the upper mirror to observe the rear
of the tractor and the status of near implement.
The lower mirror is a wide angle type.
Adjust the lower mirroring order to have a wider view of
the rear tyres.
Adjustment Method
For both the upper and lower mirror, lightly press the
portion highlighted by the arrow in any direction with a
fingertip to adjust the angle.
Do not adjust the angle by pressing the 4 corners of the
mirror.
(1) Wide angle mirror part
8. Heater for rear view mirror (if
equipped)
The rear-view mirrors are equipped with a defogger
function.
To activate defogger, press the heater mirror switch
while the key switch is in the
“ON”
position.
OPERATOR’S POSITION CONTROLS
OPERATING THE TRACTOR
M7132, M7152, M7172
147
Summary of Contents for M7-132
