Keysight 5500, User Manual

Page: 82 / 330

Preparing for Imaging
5
Keysight 5500 SPM User’s Guide 5-8
Figure 4-8 Holding the tweezers as shown, remove a probe from the
protective case
5
With the free hand, use the spring key to rock back the retainer
spring (
Figure 4-9 ), pulling it back until it contacts the scanner body.
6
Place the probe between the guides such that a little more than half
of the probe extends over the lens (placement will vary depending on
the type and shape of the probe).
Figure 4-9 shows this process. The
final probe position should be as shown in Figure 4-7 on page 7.
Figure 4-9 Hold back the retaining spring while placing the probe
7
Gently lower the spring clip to hold the probe in place.