Keysight Technologies B1505A, Configuration Manual

Page: 102 / 298

2-20 Keysight B1505A Configuration and Connection Guide
N1259A Connection Guide
Output Connection
N1259A-011 Universal Socket Module
This is a blank module, kind of a do-it-yourself kit for supporting variety of packaged
devices. This module can be used by mounting your desired socket or packaged device and
making connections same as the N1259A-010 Inline Package Socket Module.
To use this module, see the following simple instruction. For the component locations and
dimensions, see
Figure 2-11 . Also see "N1259A-010 Inline Package Socket module" on
page 2-19 to perform measurement.
• Required parts:
blank board suitable for mounting the socket or packaged device
screw M3, 4 ea., for fixing the blank board on the socket module
wire, adequate length and quantity, for making connections
hexlobe (torx type) screwdriver T-10
socket, if you use, and packaged device under test (DUT)
• Instruction:
1. Cut the blank board in 104 mm

89 mm square.
2. Make four screw holes on the board. The holes should be 4.5 mm inside from the
edge.
3. Fix the board to the blank module.
4. Remove the cover bottom of the blank module.
5. Mount the socket or DUT on the board and solder wire between its terminals and
the blank module terminals 1 to 8.
Make enough space between the socket/DUT terminal and the shield/chassis, for
example, about 1 mm for maximum 200 V output and 6 mm for 3000 V, to prevent
discharge and any accident.
6. Reattach the cover.
Figure 2-11 Universal Socket Module
90 mm
(Nut pitch: 95 mm)
165 mm
165 mm
129 mm
160 mm
105 mm
Height: 34 mm (45 mm including terminal)
(Nut pitch: 80 mm)
2
1
3
4
5
6
7
8