manualshive.com logo in svg

Keysight Technologies B1505A, Configuration Manual

Share
Download
Keysight Technologies B1505A Configuration Manual Download Page 55

Keysight B1505A Configuration and Connection Guide

1-47

Configuration Guide

Pre-configured Power Device Analyzer/Curve Tracer (B1505A with Modules/Fixture)

NOTE

Cable length is 1.5 m only (No cable length option).

NOTE

To add additional modules such as a B1511B MPSMU into the B1505AP package, the 
B1505AU with corresponding module option has to be ordered and users have to send their 
B1505A mainframe to Keysight Service Center for installing modules. So, building a 
B1505A configuration from scratch is recommended.

NOTE

To add additional accessories of the N1259A or N1265A, please order them separately 
using the N1259AU or N1265AU with corresponding options.

Summary of Contents for B1505A











































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands