ii
z
BEFORE OPERATION
z
Meanings of Pictorial Indication
Various pictorial indications are included in this manual and are
shown on this equipment so that you can operate them safely
and correctly and prevent any danger to you and / or to other
persons and any damage to your property during operation.
Such indications and their meanings are as follows.
Please understand them before you read this manual:
DANGER
This indication is shown where incorrect equipment
operation due to negligence may cause death or serious
injuries.
WARNING
This indication is shown where any person is supposed to
be in danger of being killed or seriously injured if this
indication is neglected and these equipment are not
operated correctly.
CAUTION
This indication is shown where any person is supposed to
be injured or any property damage is supposed to occur if
this indication is neglected and these equipment are not
operated correctly.
Examples of Pictorial Indication
Electric Shock
The
U
mark represents CAUTION (including DANGER and
WARNING).
Detailed contents of CAUTION ("Electric Shock" in the example
on the left) is shown in the mark.
Disassembling
Prohibited
The
;
mark represents prohibition.
Detailed contents of the prohibited action ("Disassembling
Prohibited" in the example on the left) is shown in the mark.
Disconnect the
power plug
The
z
mark represents instruction.
Detailed contents of the instruction ("Disconnect the power
plug" in the example on the left) is shown in the mark.
Warning Label
There is a warning label on the top cover of the equipment.
Do not try to remove, break or modify the label.
Summary of Contents for JMR-611
