Japan Radio Co. JMR-611 Instruction Manual Download Page 81

Page: 81 / 188

3.5 GENERAL OPERATIONS

3-27

4 Select mode and press [ENTER] key.

The mode of expansion will be changed, and current mode is displayed next to MENU of
the screen.

5 Press [ MENU] key.

Menu will be closed.

Effect of target enlargement
Off

: Select this mode particularly when resolution is required.

Fair

: Radar echoes are expanded by 1 scale in all directions.

Strong : Radar echoes are expanded by 2 scales in all directions on the display.

3.5.12 STC Curve

This RADAR has two kinds of STC characteristics. One is for sailing in the river, and other one is for
sailing in the sea.

Procedures

1 Press [ MENU] key.

MAIN MENU will appear.

2 Put the cursor on 3.Setting and press [ENTER] key.

SETTING MENU will appear.

3 Put the cursor on 4.STC Curve and press [ENTER] key.

STC CURVE SETTING MENU will appear.

4 Select mode and press [ENTER] key.

STC characteristic will be changed.

5 Press [ MENU] key.

Menu will be closed.

Summary of Contents for JMR-611





























































































































































































Search results

Summary of Contents for JMR-611

Reviews:

Related manuals for JMR-611

Brands by name

Popular brands

Japan Radio Co. JMR-611, Instruction Manual

Search results

Summary of Contents for JMR-611

Reviews:

Related manuals for JMR-611

Brands by name

Popular brands