Japan Radio Co. JMR-611, Instruction Manual

Page: 51 / 188

2-13
2.3 NAMES AND FUNCTIONS OF ON-SCREEN CONTROLS
yy
2
If this button is clicked, operation of P-LINE is acquired. Make adjustment by moving [JOG DIAL]
or [TRACK BALL]. Determine the adjustment by click this button again.
If this button is held down more than 2seconds, P-LINE will disappear.
15 16
࠙
VRM
ࠚ
If this button is clicked, operation of VRM is acquired. Make adjustment by moving [JOG DIAL] or
[TRACK BALL]. Determine the adjustment by click this button again.
If this button is held down more than 2seconds, VRM will disappear.
17
࠙
RANGE RINGS
ࠚ
Range rings will be switched to on or off, whenever this button is clicked.
18
࠙
AZIMUTH
ࠚ
The mode is switched to N-UP (North-up)/ H-UP (Head-up) or RTH-UP (Real Time Head-up)
whenever this button is clicked. (You can set N-UP only when Service Menu – Equipment Setup –
Heading Mode SEL = On.)
19
࠙
TUNE
ࠚ
To adjust the tune level, click TUNE and adjust by [JOG DIAL] or [TRACK BALL] and press
[ENTER] key. (Only when Service Menu – Equipment Setup – GSFT Soft Key = On.)
20 ࠙ GAIN LEVEL ࠚ
To adjust the gain level, click GAIN and adjust by [JOG DIAL] or [TRACK BALL] and press
[ENTER] key. (Only when Service Menu – Equipment Setup – GSFT Soft Key = On.)
21
࠙
RAIN CLUTTER SUPPRESSION LEVEL
ࠚ
To adjust the FTC level, click RAIN and adjust by [JOG DIAL] or [TRACK BALL] and press
[ENTER] key. (Only when Service Menu – Equipment Setup – GSFT Soft Key = On.)
22
࠙
SEA CLUTTER SUPPRESSION LEVEL
ࠚ
To adjust the STC level, click SEA and adjust by [JOG DIAL] or [TRACK BALL] and press
[ENTER] key. (Only when Service Menu – Equipment Setup – GSFT Soft Key = On.)
23
࠙
MENU
ࠚ
If this button is clicked, MAIN MENU will appear. To open SERVICE MENU, you need to enter
CODE MENU first. Hold down MENU more than 5 seconds, CODE MENU will appear. Then
press “1291”, SERVICE MENU will appear.
24 25
࠙
MODE OF THE EBL
ࠚ
The mode of the EBL is switched to R (Relative)/ T (True) whenever the button is clicked.
26
࠙
SOG/DEPTH1/DEPTH2
ࠚ
The mode is switched to SOG (Speed Over the Ground)/ DEPTH1 / DEPTH2 whenever the button
is clicked.
27 28
࠙
FLOATING MODE
ࠚ
The mode of the floating is switched to EBL / VRM whenever the button is clicked. (Only for USA
Mode.)
29
࠙
SEA STATE
ࠚ
The mode is switched as follow whenever the button is clicked. (Only when system is receiving