Japan Radio Co. JMR-611 Instruction Manual Download Page 99

Page: 99 / 188

3.6 DISPLAY USER MAP

3-45

[V] Displaying Saved Navigation Data (File Mark Display)

Procedures

1 Insert a flash memory card into the card slot.

In the case of display the data of internal memory, a card is not necessary.

2 Press [MENU] key.

Select    8.Next    and press [ENTER] key.
Select    4.NAV Information    and press [ENTER] key.
Select    5.File Operations    and press [ENTER] key.

3 Select 1.Select Card Slot and press [ENTER] key.

4 Select the slot number which you inserted a flash memory card or

3.Internal and press [ENTER] key.

5 Select 7.File Mark Display and press [ENTER] key.

The Card Mark Display menu will appear.

6 Select the number of the file to be displayed and press [ENTER]key.

Confirmation Window will appear.

7 Select 1.Yes and press [ENTER] key.

The selected navigation data is displayed.

8 Press [ MENU] key.

Menu will be closed.

Summary of Contents for JMR-611





























































































































































































Search results

Summary of Contents for JMR-611

Reviews:

Related manuals for JMR-611

Brands by name

Popular brands

Japan Radio Co. JMR-611, Instruction Manual

Search results

Summary of Contents for JMR-611

Reviews:

Related manuals for JMR-611

Brands by name

Popular brands