Japan Radio Co. JMR-611, Instruction Manual

Page: 78 / 188

3-24
Paint Ship’s Mark
Procedures 1 Press [ MENU] key .
Main menu will appear.
2 Put the cursor on 6.OWN MARK and press [ENTER] key.
3 Put the cursor on 1.Filled and press [ENTER] key.
If On is selected, all ship’s mark will be painted.
4 Press [ MENU] key.
Menu will be closed.
Change the Priority of Echo and Ship’s Mark
Procedures 1 Press [ MENU] key .
MAIN MENU will appear.
2 Put the cursor on 6.OWN MARK and press [ENTER] key.
3 Put the cursor on 2.RADAR Targets on Top and press [ENTER]
key.
If On is selected, RADAR targets will be displayed over all ship’s mark.
4 Press [ MENU] key.
Menu will be closed.
3.5.9 Time Setting
Time is displayed in the information window at the upper right or left of the screen only when the kind of
information is “OWN SHIP”.
If other information (GPS/ DOCKING/ AIS/ WIND or OFF) is selected, put the cursor on the button
(Fig2.3-11 or 21) and press [ENTER] key.
If GPS is connected to this RADAR, the information about time is inputted with NMEA sentence.
- In the case that NMEA sentence includes ZDA -
The setting of all is not necessary. “Time” is displayed correctly.
- In the case that NMEA sentence includes RMC but without ZDA -
The setting of only “Time Zone Setting” is necessary. After setting, “Time” is displayed correctly.