Japan Radio Co. JMR-611, Instruction Manual

Page: 61 / 188

3.3 PREPARATION
y
yy
3-7
3
3.3
PREPARATION
3.3.1 Adjust Display Brilliance [BRILL]
Procedures 1 Press [BRILL] key.
2 Set the brilliance value with the [JOG DIAL] or [TRACKBALL] to
obtain the best-to-see display with optimum brilliance.
In consideration of the ambient brightness, adjust display brilliance that is high enough to
easily observe the radar display but does not glare.
3 Press [BRILL] key.
End the adjustment of display brilliance.
3.3.2 Adjust Operation Panel Brilliance [PANEL]
Adjust brilliance of the operation panel according to the ambient lighting condition.
Procedures 1 Press [PANEL] key.
In consideration of the ambient brightness, adjust panel brilliance that is high enough to
read the characters on the operation panel but does not glare.
The
[PANEL] key lamp lights up irrespective of panel brilliance adjustment.
3.3.3 Switch Day/Night Mode [DAY/NIGHT]
Several combinations of the display color and brilliance according to the ambient lighting conditions are
provided. The display color setting is easily changed.
Procedures 1 Press [DAY/NIGHT] key.
The Day / Night modes are switched as follows.
The current mode is indicated at the bottom right of the screen.
DAY1 DAY2 DAY3 DAY4 NIGHT1
NIGHT2 NIGHT3 NIGHT4 DAY1
The brilliance level and the display color in accordance with the selected mode are saved.